Waterproofing Chemical

Product Details:

High Performance Waterproofing Membrane 

• WF SP 600
• Super Strong Bond
• Multi Purpose Application
• Sprayable
• Highly Flexible

Qulity Is Our Standard

Product Details:

Dr. Fixit Pidifin 2K is 2 parts polymer-modified flexible cementitious waterproofing membrane coatingspecially formulated for Concrete and Masonry Surface which is supplied in ready-mix kits (2 parts).When the dry part is mixed with acrylic-modified emulsion and applied according to direction,the cured.Dr.Fixit Pidifin 2K will become a tough, flexible and seamless waterproof membrane and acts as an excellent water barrier to Concrete and Masonry Surface.Area of Application● Concrete foundations, basements wall and lift pits.● Swimming pools, water tanks and reservoirs● Concealed roofs, parking decks, bathroom, toilet, kitchen, balconies and planters.● Anyother concrete, cement or masonry surface subject to damage from moisture.Features & Benefits● Quick drying● Easily applied by brushor trowel● Flexible● Excellent adhesion to concrete and masonry substrates● Non toxic substances● Environmentally friendly -free Volatile Organic Compound (VOC)● Can be applied on damp surface.● Excellent waterproofing property -No leakage up to 10 m. hydrostatic pressure.Method of Application1 Surface Preparation● Allow new concrete and masonry substrate to fully cure prior application.● All surfaces  must  be  free  from  oil,  grease,  wax,  dirt  or  any  other  form  of  foreign  matter  which mighteffect adhesion. Spalled Concrete must be sound before applied.● Substrate  should  be  reach  a  Saturated  Surface  Dry  (SSD)  condition  (damp,  without  standing water)2 Mixing● Using Portland mechanical mixer, slowly add Powder part to Liquid part in a clean container until asmooth and homogenous slurrymixture is achieved.● Allow the mixed slurry to stand for 5-10 minutes for releasing air-trapped during the mixing prior toapplication. Mixing material must be use within recommend pot life.3 Applications● Dr.Fixit Pidifin 2K slurry can be applied by brush or trowel. DO NOT dilute with water. Recommendedcoverage rate is approximately 1.1 kg./m2/coat for 0.8 mm. thick of wet film thick (minimum 2 coat.)● Allow the slurry to cure for at least 1 hour before applying a second coat.4 Curing● For maximum protection, allow 12 to 24 hours curing time after the second coat.● Dr. Fixit Pidifin2Krequires at least 7 days before filling spas, swimming pools and water tanks with water as well as mock-up or ponding tests on site” to‘requires at least 7 days before filling spas, swimming pools and water tanks with water as well as mock-up or ponding tests on site’

Product Details:

DESCRIPTION Sika® Chapdur (IN) is a one part, preblended, coloured mineral dry shake hardener for concrete comprising of cement, specially selected natural mineral aggregates, admixtures and pigments. Sika® Chapdur (IN) provides a extremely hard wearing and abrasion resistant topping for monolithic floors. When sprinkled and trowelled into fresh wet concrete floors, it forms a coloured, dense and wear resistant smooth surface. USES Sika® Chapdur (IN) may only be used by experienced professionals. Suitable for use in all cases where floors are subjected to severe mechanical wear and there is a need to apply special hard wearing surface coverings, such as: ▪ Warehouses ▪ Factories ▪ Shopping malls ▪ Public areas ▪ Restaurants ▪ Museums ▪ Parking lots ▪ Garages and Service stations 

Product Details:

Fosroc EP10 is a two-component epoxy resin-based adhesive and bonding agent produced by Fosroc, a leading company in the construction chemicals industry. This product is commonly used for a variety of applications in construction, civil engineering, and industrial settings. Here is a description of Fosroc EP10:

1. Epoxy Resin-Based: Fosroc EP10 is primarily composed of epoxy resin, which is known for its strong bonding properties, durability, and resistance to a wide range of chemicals and environmental factors.

2. Two-Component System: It is supplied as two separate components – a resin (Part A) and a hardener (Part B). These components need to be mixed in the correct proportions just before application to activate the adhesive properties.

3. Bonding and Adhesion: Fosroc EP10 is designed for high-strength bonding and adhesion of various construction materials, including concrete, masonry, steel, wood, and many plastics. It can be used for bonding new concrete to old concrete, anchoring bolts or rebar, and repairing cracks and voids in concrete structures.

4. Versatile Applications: This epoxy adhesive is versatile and finds applications in structural bonding, concrete repair, grouting, and anchoring. It can be used for both vertical and horizontal applications.

5. High Strength: Once cured, Fosroc EP10 offers high bond strength and can withstand heavy loads and stresses. This makes it suitable for critical structural applications where the integrity of the bond is crucial.

6. Chemical Resistance: It provides resistance to a variety of chemicals, which makes it suitable for use in industrial environments where exposure to corrosive substances is a concern.

7. Easy to Mix and Apply: Mixing the resin and hardener components is straightforward, and the product can be applied using a brush, roller, or trowel. It typically has a pot life (working time) that allows sufficient time for proper application.

8. Curing Time: The curing time of Fosroc EP10 can vary depending on factors like temperature and humidity, but it generally achieves sufficient strength within a few hours to several days after application.

9. Safety Precautions: When working with epoxy products like Fosroc EP10, it's important to follow safety precautions, including wearing appropriate personal protective equipment (PPE), providing adequate ventilation in enclosed spaces, and adhering to manufacturer guidelines for safe handling and disposal.

As with any construction chemical product, the specific properties and recommended uses of Fosroc EP10 may vary depending on the product formulation and the manufacturer's instructions. It is essential to consult the product's technical data sheet and follow the manufacturer's guidelines for proper storage, mixing, and application procedures to ensure the best results and safety during its use in construction and industrial projects

Product Details:

As of my last knowledge update in September 2021, I don't have specific information about a product called "Arda Roofguard White." It's possible that this product is not widely known or may have been introduced to the market after my last update. Product names and formulations can vary by manufacturer and region.

If "Arda Roofguard White" is a specific roofing or construction product, I recommend contacting the manufacturer or a local supplier for detailed information. They can provide you with information about the product's specifications, recommended uses, installation guidelines, and any other relevant details.

Keep in mind that product names and formulations can change over time, so it's important to refer to the most current product information and follow the manufacturer's recommendations for proper use and installation

Product Details:

Sika Bond SBR is a type of bonding agent and admixture used in construction and building applications. SBR stands for Styrene Butadiene Rubber, which is a synthetic polymer. Sika is a well-known company that produces a wide range of construction chemicals and materials, including bonding agents like Sika Bond SBR.

Here are some key uses and properties of Sika Bond SBR:

1. Bonding Agent: Sika Bond SBR is primarily used as a bonding agent to improve the adhesion of cementitious materials such as mortar, concrete, and render to various substrates like concrete, masonry, steel, and wood. It enhances the bond strength between old and new concrete surfaces, making it useful for repairs and renovations.

2. Admixture: Sika Bond SBR can also be used as an admixture in concrete and mortar mixes. When used in this way, it can improve the workability, durability, and water resistance of the concrete or mortar. It can help reduce cracking and improve the overall performance of the mixture.

3. Waterproofing: This product can also be used to make water-resistant coatings and renders, making it suitable for applications where moisture resistance is essential, such as in basements, swimming pools, and water tanks.

4. Repair and Restoration: It is often used in repair and restoration projects to bond new concrete or mortar to existing structures and to improve the durability of the repaired surfaces.

5. Flexible and Durable: Sika Bond SBR is known for its flexibility and durability, making it suitable for use in both interior and exterior applications.

6. Easy to Use: It is typically available as a liquid that can be easily mixed with cement or other building materials. Follow the manufacturer's instructions for the specific application.

Keep in mind that the exact properties and uses of Sika Bond SBR may vary slightly depending on the specific formulation and product line. Always refer to the product's technical data sheet and follow the manufacturer's recommendations for proper use and application. Additionally, safety precautions should be taken when handling any construction chemicals, including wearing appropriate protective gear and ensuring proper ventilation in work areas.

Product Details:

Integral Waterproofing Admixture With Advanced Technology
Paanch Ka Dum
5 Benefit

• Advanced Technology
• Corrosion Resistance 
• High Strength 
• Cohesive Mix
• Durability

Additional Information:

• Delivery Time: same day

Product Details:

CHRYSO® STRUCO EXCEL is a heavy-duty damp proofing (water repellency) admixture for concrete, mortars and any type of cementitious renders. The presence of this integral compound resists and reverses the normal tendency of hardened concrete to absorb water by capillary action and makes the concrete totally sealed against penetration of water (or liquids).  

Product Details:

• To be used in combination with part B- Powder additive 
• Flexibal Coating
• Strong Adhesion
• Two Component 
• Economical Waterproofing 
• Easy To Apply 
• Water Resistant 

Product Details:

Renderoc RG is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a free-fl owing non-shrink repair micro concrete. The material is based on Portland cements, graded aggregates and fi llers, and additives which impart controlled expansion characteristics in the plastic state, while minimising water demand. The low water requirement ensures high early strength and long-term durability. For larger repairs, the mixed Renderoc RG may be modifi ed by the addition of 5mm to 12mm clean, graded, saturated surface dry aggregates at site. For exceptionally large repairs, the local Fosroc offi ce shall be consulted.

Renderoc RG is used for repairs to damaged reinforced concrete elements, particularly where access is restricted and where vibration of the placed material is diffi cult or impossible. It is suitable for various structural strengthening measures such as encasement build-ups, jacketing, piletop encapsulation resin system, etc. 

Advantages  Gaseous expansion system compensates for shrinkage and settlement in the plastic state.  Can be pumped or poured into restricted locations.  Highly fl uid to allow for placement without vibration.  Pre-packed to overcome site-batched variations.  Rapid strength gain to facilitate early reinstatement.  High ultimate strengths and low permeability of cured repair.  Contains no chloride admixture. Ensures piletop integrity as part of a waterproofi ng system

Product Details:

CICO  TAPECRETE  P-151, popularly   known   as TAPECRETE is   an   acrylic   based   Polymer Modified    Cementitious    Flexible    Composite coating   system. CICO  TAPECRETE  P-151in conjunction  with  cement  provides  properties  tocombattheshortcomingsofplaincement, particularly   its   poor   adhesion   properties,low impactstrength,lowflexuralstrengthandthin section    fragility. CICO  TAPECRETEP-151 polymeraddstothepotentialuseaswellas enhances   the   properties   of   cement   slurry/ mortar/concrete  making  them  excellent  choiceforuseinnewaswellasrenovation work

Product Details:

For modifying and improving bonding of floor toppings,renderings and mortars; repair of worn, damaged and spalledconcrete, repair of large cracks; polymer modified floorscreeds; waterproof plasters for masonary and slurries.

Advantages„Simple to use - Single component,  gauged as  required.„High  -  Provides  excellent  bond  to    concrete,    adhesionplaster,  masonry, stone work, etc.„Improves -Gives weather resistant mortar with improveddurability  impermeability  to  chlorides  and  other  harmfulagents.„Reduces  -  Provides  waterproof  screeds,  plasters    andPermeability  slurries.„Increases  -  Improved  tensile  and  flexural  propertiesstrength  allow  thin  applications.„Versatile - Compatible with all common hydraulic cements.„Cost effective - Nitobond SBR (Latex)  is economical  to use.

Product Details:

MasterEmaco SBR ECO is an eco-friendly blue coloured, Styrene-Butadiene co-polymer (SBR) latex liquid, free of APEO, formaldehyde, ammonia and low VOC. The product compliments MasterEmaco SBR 2, daily use SBR latex.

MasterEmaco SBR ECO, being environmentally friendly is safe to handle as neat liquid or with concrete for repair and waterproofing applications

Product Details:

DescriptionDr. Fixit Repellin WR is composed of Siloxane & Silane polymers dispersed in high boiling point solvent. it is used for waterproofing of concrete & cementitious vertical walls of building because it penetrate deeply into the substrate & provides an effective water repellent protective coating. it does not changes the appearance of the substrate & the water repellant coating is uv resistant and durable.Areas of ApplicationWater repellent treatment for - cement painted surfaces. }} concrete, mortar. }} clay brick surfaces.}} natural and artificial stones.}}Mangalore tiled roofs.}} corrugated ac sheet roofing, etc

Product Details:

Backer rod, also known as a backer foam or backing rod, is a flexible cylindrical foam material used primarily in construction and joint sealing applications. Its main purpose is to support sealant and maintain the shape and depth of joints before the application of sealant or caulk. Backer rods come in various sizes and materials to accommodate different joint widths and project requirements

Product Details:

CHRYSO TAPELASTIC is a two component, elastomeric, acrylic polymer modified cementitious waterproofing protective coating system in slurry form. 

Product Details:

Dr. Fixit Lw is a waterproofing and crack-sealing product offered by Pidilite Industries, a well-known Indian company that produces a wide range of construction and adhesive products. Dr. Fixit is a brand under Pidilite Industries that specializes in waterproofing solutions. Dr. Fixit Lw is designed for use in various construction applications to prevent water leakage and seal cracks in buildings and structures. Here is some information about Dr. Fixit Lw:

1. Waterproofing Solution: Dr. Fixit Lw is primarily used as a waterproofing solution. It is designed to create a watertight barrier on various surfaces, including concrete, masonry, and brickwork, to prevent water ingress and leakage.

2. Crack Sealing: This product is also used for sealing cracks and joints in construction materials. It helps prevent water from seeping through cracks, which can cause structural damage and deterioration over time.

3. Flexible and Durable: Dr. Fixit Lw is known for its flexibility and durability. It can accommodate minor movements and settlement of buildings without losing its effectiveness.

4. Application: The product is typically applied by brushing or roller coating onto the surface. It can be used on both horizontal and vertical surfaces, including roofs, terraces, basements, and external walls.

5. Compatibility: Dr. Fixit Lw is compatible with a wide range of construction materials, including concrete, cement mortar, and masonry.

6. Protection: In addition to waterproofing and crack sealing, Dr. Fixit Lw provides protection against the damaging effects of water, moisture, and weathering, thereby increasing the longevity of the structure.

7. Easy to Use: It is designed to be user-friendly and can be applied by skilled laborers or contractors. However, it is essential to follow the manufacturer's application guidelines for the best results.

8. Product Varieties: The Dr. Fixit product line includes various formulations and variants to cater to specific waterproofing and sealing needs, such as Dr. Fixit Lw Plus, Dr. Fixit Newcoat, and others. Each variant may have slightly different properties and recommended applications.

9. Precautions: Safety precautions, including the use of appropriate personal protective equipment (PPE) and proper ventilation, should be followed when handling and applying Dr. Fixit Lw or any similar construction chemical product.

Keep in mind that the specific properties, recommended uses, and application procedures for Dr. Fixit Lw may vary depending on the product variant and formulation. Always refer to the product's technical data sheet and follow the manufacturer's instructions for proper storage, mixing, and application to ensure effective waterproofing and crack-sealing results in your construction projects.

Product Details:

Product Details: